How to maintenance a stone CNC Router

We already know that in the process of using the engraving machine, the machine needs to be maintained regularly. Daily maintenance is essential for the machine to maintain a good working condition and prolong its service life. When using a stone engraving machine, it is also necessary to check and maintain the equipment regularly to avoid malfunctions of the machine when it is working.
 

One :Check the water circulation system and lubrication device in time.
 
In winter, the weather is cold and the temperature is low. The antifreeze in the water cooling system must be added and replaced in time, and the oil in the lubrication system should also be replaced in time. If supplementary antifreeze is not added in time in winter, the water pipes will freeze, causing the spindle to freeze and rupture, thereby affecting the machine’s work. The lubrication device is also a very important part. It is a necessary step to ensure the smooth and precise machining of the spindle. If the oil is not replaced in time, the oil will be thick and flow slowly, and it will not provide lubrication, causing the oil supply system to malfunction, which affects the processing of the work.
 
Two :Pay attention to the temperature of the spindle.
 
Operation in winter is okay, because the temperature is relatively low, the spindle generally does not overheat, but in the summer, the air temperature is higher, if the spindle is in working condition for a long time, it will cause the spindle to overheat and damage. Therefore, we must pay attention to the temperature of the spindle and cool the spindle in time. Especially for stone engraving machines, which mainly process hard materials such as granite and marble, the spindle is more likely to overheat, so we will be equipped with a water circulation cooling system to ensure that the spindle will not be damaged. On the one hand, we can add new cold water to the water tank in time to prevent the spindle temperature from becoming too high through normal water circulation. On the other hand, we can cool the spindle by equipping a special water cooler.
 
Three: Ensure a good working environment, reduce current interference, ensure a safe working environment for the machine, improve the stability of the machine's working process, and protect the operator. We recommend that when there are frequent thunderstorms in your area, try not to use the machine and disconnect the power supply.
 
Keep the workshop ventilated in time, the surrounding environment is dry, and pay attention to check whether there is water leakage in the workshop. Since the body of the engraving machine is made of steel or cast iron, if the surrounding environment is humid, it will rust the body of the machine and damage the body. At the same time, a humid working environment may also cause other internal structural failures, such as a short circuit of electronic components.
 
Four :Keep the working voltage stable. When we use machines for processing, we try to avoid peak electricity consumption, because this situation usually has the phenomenon of unstable power supply voltage. Unstable voltage will lead to unstable spindle processing, and it is likely to stop running, or even burn the spindle. Therefore, it is recommended to avoid peak usage, and a voltage regulator can be equipped to ensure that the circuit voltage is normal.
 
The above are some basic maintenance suggestions we provide you. If you encounter other problems when using the Stone cnc router, please feel free to contact us and leave us a message. We have professional after-sales personnel will answer you.
 
Contact Ways：
WeChat & Whatsapp & Celphone：86-15560254545